1977 Hyundai Pony 1400 GLS – Workshop Service & Repair Manual

1. Prepare Your Tools: Gather necessary tools, including wrenches, a timing belt kit, and new belts.
2. Disconnect the Battery: Ensure safety by disconnecting the negative battery terminal.
3. Remove the Old Belts: Locate and remove the old timing belt and accessory belts.
4. Install New Belts: Align and install the new timing belt and accessory belts according to the manufacturer's specifications.
5. Check Alignment: Verify that the belts are properly aligned and tensioned.
6. Reattach Battery: Reconnect the battery and start the engine to ensure proper operation.

For detailed guidance and visuals, our manual provides step-by-step instructions for this procedure.

1. Inspect the Pump: Check for visible leaks or listen for unusual noises.
2. Drain Power Steering Fluid: Remove the old power steering fluid.
3. Remove the Old Pump: Disconnect the power steering pump from its mounting bracket and hoses.
4. Install the New Pump: Place the new pump in position, secure it, and reconnect the hoses.
5. Refill Fluid: Refill the system with the recommended power steering fluid.
6. Test the System: Start the engine and turn the steering wheel to check for proper operation and any remaining leaks.

Our manual offers detailed instructions on diagnosing and replacing the power steering pump.

1. Lift the Vehicle: Use a jack to lift the front of the car and secure it with jack stands.
2. Remove the Wheels: Take off the front wheels to access the brake components.
3. Remove Old Brake Pads and Rotors: Detach the caliper, then remove the old brake pads and rotors.
4. Install New Rotors and Pads: Place the new rotors and install the new brake pads.
5. Reassemble: Reattach the caliper and wheel, then lower the vehicle.
6. Test Brakes: Pump the brakes to ensure proper function before driving.

Our manual provides in-depth instructions and tips for brake pad and rotor replacement.

1. Check Tire Pressure: Ensure tires are inflated to the recommended levels.
2. Inspect for Uneven Wear: Look for signs of uneven tire wear that might indicate alignment issues.
3. Balance Tires: Have your tires balanced at a professional service center.
4. Alignment Check: Schedule a wheel alignment to correct any misalignment issues.
5. Regular Maintenance: Regularly check and adjust tire balance and alignment to prevent future issues.

For comprehensive tire maintenance, refer to our manual's detailed sections on wheel balance and alignment.

1. Check Oil Pressure: Verify that oil pressure is within the normal range.
2. Inspect for Leaks: Look for any oil or fluid leaks around the engine.
3. Monitor Engine Temperature: Ensure the engine is not overheating.
4. Clean or Replace Filters: Check and replace air and fuel filters if needed.
5. Address Engine Codes: Use a diagnostic tool to read and address any engine trouble codes.

Our manual offers detailed troubleshooting advice and maintenance tips for optimal engine performance.