1. Inspect the Rust: Identify all rusted areas, focusing on common spots like wheel arches, door sills, and undercarriage.
2. Remove the Rust: Use a wire brush or sandpaper to remove loose rust. For severe rust, consider using a rust remover chemical.
3. Apply Rust Inhibitor: Treat the cleaned surface with a rust-inhibiting primer to prevent further corrosion.
4. Paint and Seal: Once the primer is dry, apply touch-up paint and a clear sealant to protect the area.

For detailed instructions and tips on rust prevention and repair, refer to our comprehensive Workshop Service & Repair Manual for the 1976 Ford Capri II 1600 Ghia.

1. Check the Battery: Ensure the battery terminals are clean and securely connected. Test the battery voltage.
2. Inspect Fuses: Replace any blown fuses in the fuse box.
3. Examine Wiring: Look for damaged or frayed wires, especially around the fuse box and connectors.
4. Test Electrical Components: Use a multimeter to check the functionality of switches, relays, and other electrical components.

Our manual provides detailed wiring diagrams and troubleshooting steps to help you resolve electrical issues efficiently.

1. Clean the Carburetor: Remove the carburetor and clean it thoroughly using a carburetor cleaner.
2. Inspect Jets and Passages: Ensure all jets and passages are clear of debris.
3. Adjust the Mixture: Follow the manual’s guidelines to adjust the air-fuel mixture for optimal performance.
4. Reassemble and Test: Reassemble the carburetor, reinstall it, and test the engine to ensure proper operation.

For step-by-step cleaning and adjustment procedures, refer to our detailed manual for the 1976 Ford Capri II 1600 Ghia.

1. Inspect Suspension Components: Check for worn-out bushings, shocks, and struts.
2. Replace Worn Parts: Replace any damaged or worn suspension parts.
3. Check Alignment: Ensure the wheel alignment is correct to avoid uneven wear.
4. Perform Regular Maintenance: Schedule regular inspections and maintenance to prolong the life of the suspension system.

Our manual includes comprehensive maintenance schedules and repair instructions for suspension issues.

1. Locate the Leak: Check for leaks in hoses, the radiator, and the water pump.
2. Replace Faulty Components: Replace any damaged hoses, seals, or gaskets.
3. Flush the System: Flush the cooling system to remove any debris and contaminants.
4. Refill and Test: Refill the system with coolant and run the engine to ensure there are no more leaks.

For detailed guidance on repairing cooling system leaks and maintaining optimal performance, consult our Workshop Service & Repair Manual.