1. Inspect for Rust: Check the front fenders thoroughly for signs of rust or corrosion.
2. Clean the Affected Area: Remove any loose rust and clean the area with a wire brush.
3. Apply Rust Treatment: Use a rust remover or converter to treat the affected areas.
4. Prime and Paint: Apply a rust-inhibiting primer followed by matching paint to protect against future rust.

Our manual provides detailed instructions for rust removal and prevention.

1. Check Ignition Components: Inspect the ignition coils, spark plugs, and spark plug wires for wear or damage. Replace as needed.
2. Inspect the Air Filter: A clogged air filter can affect engine performance. Replace if dirty.
3. Test Fuel System: Check the fuel injectors for proper operation and clean if necessary.
4. Examine the Idle Air Control Valve: Ensure it's functioning correctly and clean or replace if faulty.

Our manual includes troubleshooting tips and repair procedures for ignition and idling issues.

1. Check Brake Fluid Levels: Ensure the brake fluid is at the recommended level. Top up if necessary.
2. Inspect Brake Pads and Rotors: Examine for wear and replace worn brake pads or damaged rotors.
3. Bleed the Brakes: If the brakes feel spongy, bleed the brake lines to remove air bubbles.
4. Check for Leaks: Inspect the brake lines and connections for any leaks or damage.

Find detailed brake maintenance procedures in our workshop manual.

1. Check the Air Filter: Replace a clogged air filter to ensure optimal engine airflow.
2. Inspect the Fuel System: Ensure the fuel filter and fuel pump are functioning correctly and replace if needed.
3. Examine the Exhaust System: Look for blockages or damage in the exhaust system that could affect performance.
4. Verify Engine Tuning: Ensure the engine is properly tuned for optimal performance.

Our manual provides step-by-step guidance on diagnosing and fixing performance issues.

1. Check Coolant Levels: Ensure the coolant is at the appropriate level. Top up if necessary.
2. Inspect the Heater Core: Look for leaks or blockages in the heater core and replace if damaged.
3. Verify Thermostat Function: Ensure the thermostat is operating correctly and replace if faulty.
4. Inspect Heater Controls: Ensure the heater control valve is working properly.

Our manual includes thorough instructions for heating system maintenance and repairs.