1. Check Spark Plugs: Inspect and replace any faulty spark plugs.
2. Examine Ignition Coils: Test ignition coils for defects and replace them if necessary.
3. Inspect Fuel Injectors: Clean or replace clogged fuel injectors.
4. Check Engine Sensors: Ensure the oxygen sensor and mass airflow sensor are functioning properly.
5. Test Compression: Conduct a compression test to identify potential issues with the engine's internal components.

Our Workshop Service & Repair Manual provides detailed instructions and diagrams for diagnosing and fixing engine misfires, helping you get your Tiburon running smoothly again.

1. 1. Inspect Timing Belt: Look for signs of wear, such as cracks or fraying.
   2. Remove Old Belt: Follow the manual to safely remove the old timing belt.
   3. Align Timing Marks: Ensure all timing marks are aligned correctly before installing the new belt.
   4. Install New Belt: Carefully place the new timing belt, maintaining proper tension.
   5. Test Engine: Rotate the engine manually to verify the timing belt is installed correctly and then start the engine.

   Our manual offers comprehensive, step-by-step guidance on replacing the timing belt, ensuring accurate and safe installation.

1. Check Clutch Fluid: Ensure the clutch fluid is at the appropriate level and not contaminated.
2. Inspect Clutch Pedal: Adjust the clutch pedal free play if necessary.
3. Examine Clutch Components: Inspect the clutch disc, pressure plate, and flywheel for wear or damage.
4. Replace Worn Parts: Follow the manual's instructions to replace any worn or damaged clutch components.
5. Test the Clutch: After reassembly, test the clutch for proper operation.

With our manual, you'll have all the detailed procedures and illustrations needed to diagnose and repair clutch issues efficiently.

1. Check Fuses: Inspect and replace any blown fuses.
2. Test Battery and Alternator: Ensure the battery is charged and the alternator is functioning correctly.
3. Inspect Wiring: Look for any damaged or corroded wiring and repair as needed.
4. Examine Connectors: Ensure all electrical connectors are secure and free of corrosion.
5. Use a Multimeter: Test various electrical components to pinpoint the source of the issue.

Our manual provides extensive troubleshooting tips and detailed electrical diagrams to help you resolve electrical issues with ease.

1. Check Brake Fluid: Ensure the brake fluid is at the proper level and not contaminated.
2. Inspect Brake Pads and Rotors: Look for wear and replace brake pads and rotors if necessary.
3. Bleed the Brakes: Follow the manual's instructions to bleed the brake lines and remove any air bubbles.
4. Examine Brake Lines: Check for leaks or damage in the brake lines and repair as needed.
5. Test Brake Function: After making repairs, test the brakes to ensure they are working correctly.

Our Workshop Service & Repair Manual offers step-by-step procedures and clear diagrams for diagnosing and fixing brake system issues, ensuring your safety on the road.