2007 Hyundai Tiburon GS automatic – Workshop Service & Repair Manual

1. Check Transmission Fluid: Ensure the fluid level is adequate and top up if necessary. Inspect the fluid for cleanliness—dirty fluid should be replaced.
2. Inspect the Transmission Filter: Replace the filter if it’s clogged or dirty.
3. Examine for Leaks: Look for any leaks in the transmission system that could cause fluid loss.
4. Reset the Transmission Control Module (TCM): Disconnect the battery for a few minutes to reset the TCM, which might help resolve minor issues.

For a detailed guide on fixing transmission issues, refer to our comprehensive workshop manual.

1. Check the Refrigerant Level: Ensure the refrigerant is at the proper level and recharge if needed.
2. Inspect the AC Compressor: Look for signs of damage or wear and ensure it engages properly when the AC is turned on.
3. Examine the AC Condenser: Clean the condenser and check for blockages or leaks.
4. Test the AC Controls: Ensure that the temperature and fan controls are functioning correctly and replace any faulty components.

For detailed steps on repairing the air conditioning system, consult our repair manual.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Test Battery Connections: Ensure battery terminals are clean and tightly connected.
3. Inspect Wiring: Examine the wiring harness for any signs of damage or loose connections.
4. Run Diagnostic Tests: Use a diagnostic tool to identify any error codes that could indicate electrical faults.

For comprehensive troubleshooting of electrical problems, refer to our detailed manual.

1. Inspect Brake Pads: Check for wear and replace any worn-out brake pads.
2. Examine Brake Rotors: Look for scoring or warping on the rotors and have them resurfaced or replaced if necessary.
3. Check Brake Calipers: Ensure the calipers are functioning correctly and not sticking.
4. Inspect Brake Lines: Look for leaks or damage in the brake lines and repair as needed.

For detailed brake maintenance and repair procedures, see our workshop manual.

1. Check Fuel Filter: Replace the fuel filter if it’s clogged.
2. Inspect Fuel Pump: Test the fuel pump for proper operation and replace if it’s malfunctioning.
3. Examine Fuel Lines: Look for leaks or damage in the fuel lines and repair as needed.
4. Run Fuel System Cleaner: Use a fuel system cleaner to remove any deposits that could be affecting performance.

For step-by-step instructions on maintaining and repairing the fuel system, refer to our comprehensive manual.