2008 Hyundai Atos 1.1 – Workshop Service & Repair Manual

• Identify the Leak: Inspect the radiator for visible cracks or holes. Look for any coolant puddles underneath the car.
• Seal Minor Leaks: Use a radiator sealant for temporary fixes if the leak is small.
• Replace the Radiator: If the damage is severe, remove the old radiator and replace it with a new one.
• Check for Other Issues: Ensure that hoses and clamps are secure. Our manual provides detailed instructions for both temporary and permanent fixes.

• Inspect the System: Start by checking for any visible leaks in the refrigerant lines or condenser.
• Test the Compressor: If the compressor is not engaging, the system may be low on refrigerant or the compressor may be faulty.
• Recharge the System: If needed, recharge the system with the correct refrigerant, and monitor its performance.
• Replace Faulty Components: If the compressor or other parts are defective, consult the manual for step-by-step instructions on replacing them.

• Check the Spark Plugs: Inspect the spark plugs for wear or carbon buildup. Replace them if necessary.
• Test the Ignition System: Verify that the ignition coils and wires are functioning properly.
• Fuel System Check: Inspect fuel injectors for clogs or leaks and ensure proper fuel delivery.
• Engine Diagnostics: Our manual includes specific troubleshooting steps to diagnose and fix engine misfires efficiently.

• Inspect Brake Pads: Check the brake pads for excessive wear. If they're too thin, replace them.
• Check Rotors: Inspect the brake rotors for grooves or damage. Resurface or replace them if needed.
• Brake Fluid: Ensure that the brake fluid is at the correct level and is not contaminated.
• Brake System Check: Our manual provides detailed procedures to address brake issues and ensure your vehicle's braking system is safe.

• Check Fluid Levels: Ensure the transmission fluid is at the correct level and not burnt.
• Inspect for Leaks: Look for any leaks in the transmission system.
• Transmission Filter: Replace the transmission filter if it's clogged.
• Professional Help: If the issue persists, the transmission may need to be inspected by a professional mechanic.

The manual includes specific steps to troubleshoot and address transmission issues.