2014 Hyundai ix35 2.0 CRDi (136) 4WD – Workshop Service & Repair Manual

1. Inspect for Leaks: Look under the vehicle and around the fuel lines for signs of diesel fuel. Check for any wet spots or stains.
2. Check for Odors: If you smell diesel fuel inside or outside the vehicle, it could indicate a leak.
3. Verify Recall Status: Check if your vehicle falls under the recall for fuel leaks (produced between September 2011 and November 2011) by contacting a Hyundai dealership or using the recall lookup tool on the Hyundai website.
4. Get Professional Help: If a fuel leak is confirmed or if you’re unsure, take your vehicle to a certified mechanic or Hyundai dealership for inspection and repair.
5. Follow Up: Ensure that any necessary recall repairs are completed to address the fuel leak issue.

For detailed instructions on diagnosing and repairing fuel leaks, refer to our 2014 Hyundai ix35 Workshop Service & Repair Manual.

1. Verify Recall Information: Check if your vehicle, made between November 2011 and June 2012, is affected by the seat belt pretensioner recall. You can find this information through a Hyundai dealership or the recall lookup tool.
2. Inspect Pretensioner: If you’re not sure about the recall status, visually inspect the seat belt pretensioner for any signs of damage or malfunction.
3. Test Functionality: In case of any concerns, test the seat belt system to ensure it locks properly when pulled quickly.
4. Schedule Repairs: If your vehicle is part of the recall, have the necessary repairs or replacements performed at a Hyundai dealership.
5. Confirm Repairs: Ensure that the repair work is completed and the seat belt system functions correctly.

Consult our Workshop Service & Repair Manual for detailed steps on inspecting and addressing seat belt pretensioner issues.

1. Check Fuel System: Inspect the fuel system for clogs or leaks. Ensure the fuel filter is clean and replace it if necessary.
2. Examine Air Intake: Check the air filter and intake system for blockages or damage. Replace the air filter if it’s dirty or clogged.
3. Inspect Turbocharger: Ensure the turbocharger is functioning correctly and that there are no leaks in the intake or exhaust systems.
4. Run Diagnostics: Use a diagnostic tool to identify any error codes that may indicate specific issues with the engine or fuel system.
5. Consult a Mechanic: If the power loss persists, consult a professional mechanic for a thorough inspection and repair.

For a comprehensive guide on diagnosing and fixing power loss issues, refer to our 2014 Hyundai ix35 Workshop Service & Repair Manual.

1. Check Coolant Levels: Ensure that the coolant level is adequate. Top up the coolant if necessary.
2. Inspect Radiator and Hoses: Look for leaks or blockages in the radiator and coolant hoses. Replace any damaged components.
3. Examine Thermostat: Check if the thermostat is functioning properly. Replace it if it’s stuck open or closed.
4. Flush Cooling System: Perform a coolant flush to remove any debris or contaminants from the cooling system.
5. Check Fan Operation: Ensure that the cooling fan is working correctly and replace any faulty fan components.

Our manual provides detailed instructions for troubleshooting and repairing cooling system issues.

1. Change Oil Regularly: Follow the manufacturer’s recommendations for oil changes and use the recommended oil type.
2. Replace Filters: Regularly replace the engine air filter, cabin air filter, and fuel filter to ensure optimal performance.
3. Inspect Brakes: Check brake pads and rotors for wear and replace them as needed.
4. Check Fluids: Regularly check and top up essential fluids such as coolant, transmission fluid, and brake fluid.
5. Review Tire Condition: Inspect tires for tread wear and proper inflation. Rotate tires and align them as necessary.

For complete routine maintenance guidelines and schedules, refer to our 2014 Hyundai ix35 Workshop Service & Repair Manual.