1. Check the Fuel Pump Fuse: Locate the fuse box and inspect the fuel pump fuse. Replace it if it's blown.
2. Test the Fuel Pump Relay: Swap the relay with a known good one to determine if the relay is faulty.
3. Inspect Fuel Lines: Look for any leaks or blockages in the fuel lines.
4. Listen for the Fuel Pump: Turn the ignition to the "ON" position and listen for a humming sound from the fuel tank. If you don’t hear it, the pump might need replacement.
5. Test the Pump Voltage: Use a multimeter to check for voltage at the fuel pump connector. No voltage indicates a wiring issue.

Our manual provides detailed diagnostics and repair procedures for the fuel pump to ensure accurate troubleshooting and repair.

1. Inspect Spark Plugs: Remove and check the spark plugs for wear or carbon buildup. Replace them if necessary.
2. Check Ignition Coils: Test the ignition coils for proper operation. Replace any faulty coils.
3. Examine the Distributor Cap: Look for cracks or wear on the distributor cap and rotor. Replace if needed.
4. Verify Wiring Connections: Ensure all ignition wiring is securely connected and free of damage.
5. Test the Ignition Timing: Use a timing light to check and adjust the ignition timing as needed.

Our manual includes detailed instructions and diagrams to assist with ignition system repairs, ensuring a reliable fix.

1. Inspect the Timing Belt: Check for signs of wear or damage, such as cracks or fraying.
2. Check Tension: Verify the belt tension using a tension gauge. Adjust if necessary.
3. Replace the Timing Belt: If the belt shows significant wear, replace it with a new one following the manual’s guidelines.
4. Verify Timing Marks: Ensure the timing marks align correctly after replacement.
5. Inspect Related Components: Check and replace the timing belt tensioner and idler pulleys if needed.

Our manual provides comprehensive instructions on timing belt maintenance and replacement to help prevent engine damage.

1. Check Fuses and Relays: Inspect the fuse box for any blown fuses or faulty relays and replace them.
2. Test Battery Voltage: Ensure the battery is fully charged and check for any corrosion on the terminals.
3. Inspect Wiring Harness: Look for damaged or frayed wires in the electrical system.
4. Use a Multimeter: Test various electrical components for continuity and proper voltage.
5. Examine Ground Connections: Ensure all ground connections are secure and free from rust.

Our manual offers detailed troubleshooting steps and repair tips for electrical system faults to help you restore proper functionality.

1. Identify Rust Areas: Inspect the vehicle for visible rust spots, especially on the undercarriage and wheel wells.
2. Clean and Sand Rust: Remove loose rust with a wire brush or sandpaper. Clean the area thoroughly.
3. Apply Rust Converter: Use a rust converter to neutralize remaining rust and prevent further corrosion.
4. Repaint: Apply primer and paint to the treated areas to protect against future rust.
5. Preventative Measures: Regularly wash and wax your vehicle to protect it from rust and corrosion.

Our manual includes comprehensive rust and corrosion repair guidelines to help maintain the exterior of your Capri in excellent condition.